| Small servodrive for Brushless servomotors up to 8
Nm (1150 oz.-in.).
Typical Applications are:
Conveyors, Medical, Textile Equipment, Packaging Machinery, X-Y Stages,
Automated Assembly Machinery, Robotics, Component Insertion Machines.
| STANDARD
FEATURES |
| - Three phase trapezoidal brushless, four quadrant operation |
| - Panel mount |
| - Highly efficient and reliable POWER MOSFET uotput stage |
| - Single DC power supply |
- Four velocity feedback models:
| |
- Hall Feedback |
| |
- Armature Feedback |
| |
- Encoder Feedback + Hall Signals |
| |
- PWM+DIR Feedback |
|
| - Five LEDS (Red/Green) indicating operating status |
- Fully protected against
| |
- External short circuit (motor polarity) |
| |
- Over/Under voltage (supply) |
| |
- Overtemperature, Hall Signal absence |
|
| - Wide load inductance range (0,2-30 mH) |
| - 60/120 degrees commutation phase setting |
| - Four adjusting potentiometers |
| - Extractable screw terminals (for signals only) |
| - Positive / Negative Limit Switches |
- 
approval - FILE E211869
(see specific technical manual for details) |
| OPTIONS |
| - Resolver feedback |
| - Tachogenerator feedback |
| - Differential encoder input |
- Clock and direction mode
(for stepper motor controls) |
| SPECIFICATIONS |
| - Supply voltage range:
| |
[MCB Plus 60] |
20÷82 VDC |
| |
[MCB Plus 140] |
40÷182 VDC |
| |
[MCB Plus 200] |
55÷274 VDC |
|
| - Operating frequency |
22 (KHz) |
| - Operating temperature |
0÷40 °C (32÷104°F) |
| - Input reference (differential) |
±10VDC |
| - Motor current monitor |
±7.5 V (At peak current) |
| - Auxiliary output supply for encoder |
+5V/12V@250mA |
| - Enable signals |
+10÷30VDC |
| - Output voltage supply |
+10/-10VDC@ 4mA |
|
| DESCRIPTON |
| The MICROSTAR B Plus® Servodrives have been designed
ad ultra compact modules, ideal solution for incremental motion
control, velocity loop and positioning systems wich require fast
response, high torque at low speed, smooth speed control and high
reliability. |
| ACCESSORIES
(see specific data sheets for details) |
- SERVOMOTORS
| |
- Ssax 2000: 0.35÷7.5 Nm (50÷1071 oz.-in.) |
| |
- Ssax 3000: 0.7÷8 Nm (100÷1142 oz.-in.) |
|
- GERABOXES
| |
- Rex 100: |
5 flanges sizes |
| |
|
R ratios 1/3 ÷ 1/216 |
|
- POWER SUPPLY (stand alone)
| |
- MPPlus: |
63÷200 VDC OUT, 30 ADC |
| |
|
100÷800W braking power |
|
- TRANSFORMERS
| |
- TM/TT: |
single/3ph, 100 ÷ 8000 VA |
|
- NET FILTERS (for CE compliance)
| |
- FRM/FRT: |
single/3ph, 2÷16 Arms |
|
|
- DRIVERS - AZIONAMENTI BRUSHLESS E SERVOMOTORI
