| Type
|
Flange
Type |
Centering
Hole Interaxis |
Motor
Shaft lenght
and diameter |
| RID
53 |
4063 |
40-63 |
11-25 |
| 5060 |
50-60 |
11-30 |
| 63B14 |
60-75 |
11-25 |
| Normal* |
min25/max32
min36/max48 |
11-25 |
| NEMA 34 |
73-98,4 |
11-32 |
| NEMA 23 |
38,10-66,60 |
11-23 |
| 56B14 |
50-65 |
11-25 |
* These are possible measures on std model centering
Ø 26 mm, hole interaxis is Ø 39 mm.
- Il riduttore 53 è disponibile anche in versione più
corta; per le specifiche del diametro dell'albero in ingresso contattare
l'ufficio tecnico.
- The 53 erducer is available as shorter execution; for shaft diametres
spec. pls contact our sale dept. |
| RID
60 |
4063 |
40-63 |
11-25 |
| 5060 |
50-60 |
11-30 |
| 63B14 |
60-75 |
11-25 |
| Normal |
min25/max40
min39/max56 |
11-25 |
| NEMA 34 |
73-98,4 |
11-32 |
| NEMA 23 |
38,10-66,60 |
11-23 |
| 56B14 |
50-65 |
11-25 |
| 6090 |
60-90 |
11-25 |
| 56B5 |
80-100 |
11-30 |
| 7090 |
70-90 |
11-30 |
| 5070 |
50-70 |
11-30 |
| RID
80 |
71B14 |
70-85 |
19-40 |
| 63B5 |
95-115 |
19-40 |
| 63B14 |
60-75 |
19-40 |
| PAM70 |
70-90 |
19-40 |
| NEMA 48 |
76,20-95,50 |
19,05-43 |
| NEMA 42 |
55,50-125,70 |
19-40 |
| 56B14 |
50-65 |
19-40 |
| 56B5 |
80-100 |
19-40 |
| 71B5 |
110-130 |
19-40 |
| 95130 |
95-130 |
19-40 |
| 90B5 |
130-165 |
19-40 |
| 7863,5 |
78-63,5 |
19-40 |
| S4000 |
110-145 |
19-40 |
| 5070 |
50-70 |
19-40 |
| RID
105 |
71B14 |
70-85 |
19-40 |
| 63B5 |
95-115 |
24-50 |
| 63B14 |
60-75 |
14-40 |
| PAM70 |
70-90 |
19-40 |
| NEMA 48 |
76,20-95-50 |
19,05-43 |
| NEMA 42 |
55,50-125,70 |
24-50 |
| 56B14 |
50-65 |
19-40 |
| 56B5 |
80-100 |
19-30 |
| 71B5 |
110-130 |
24-50 |
| NEMA 56 |
114,30-149,07 |
24-54 |
| 90B5 |
130-165 |
24-50 |
| S4000 |
110-145 |
19-50 |
| RID
135 |
63B5 |
95-115 |
28-50 |
| NEMA 140 |
114,30-149,22 |
32-64 |
| NEMA 42 |
55,50-125,70 |
15,875-50 |
| 56B5 |
80-100 |
19-50 |
| 71B5 |
110-130 |
24-50 |
| 90B5 |
130-165 |
32-60 |
| S4000 |
110-145 |
35-60 |
| 100B5 |
180-215 |
35-60 |
| S6000 |
114,30-200 |
35-80 |
N.B. All measures are in mm and specialy for
motor shaft are the max possible on ordering pls. specify
always diameter and shaft length for correctly define the flage length.
Ordering example:
For a reducers RID 80 with backlash max 10', ratio 20/1 to be mounted
on a motor whith shaft of Ø 14x30mm lenght, flange with centering of 110
mm and hole interaxis of 130 mm with small vice with key use the fowling
code:
|
Record 1 |
Record 2 |
Record 3 |
Record 4 |
Record 5 |
Record 6 |
Record
7 |
Record 8 |
| RID 80 |
20/1 |
SK |
14x30 |
71B5 |
10' |
D/B |
C.O. |
| Record 1 = |
Reducer type |
| Record 2 = |
Ratio requied |
| Record 3 = |
SK=> small vice with key
SS=>
shrink disk |
| Record 4 = |
Motor Shaft lenght and diameter |
| Record 5 = |
Flange type |
| Record 6 = |
Backlash |
| Record 7 = |
First stage satellites gear type. (D= Delrim; B= Bachelite) |
| Record 8 = |
C.O. => Cuscinetti conici - Taper bearings
C.R.
=> Cuscinetti a rulli - Roller bearings |
|
